HONDA
Schedule Maintenance Check Sheet|
Customer Name: |
Mileage: |
Model: |
NT650V Deauville |
V.I.N: |
|||
|
Date: |
Registration N0: |
Under warranty yes/no |
Work Completed: |
|
Miles or Months |
4000 |
8000 |
12000 |
16000 |
20000 |
24000 |
||||
|
6 |
12 |
18 |
24 |
30 |
36 |
|
1. Check lights, horn, indicators, instrument warning lights, brake lights and instruments |
* |
* |
* |
* |
* |
* |
|
|
2. Inspect throttle choke clutch cables for damage, fraying and correct level of free play |
* |
* |
* |
* |
* |
* |
|
|
3. Inspect brake pads for wear |
* |
* |
* |
* |
* |
* |
|
|
4. Check and top up both brake master cylinders |
* |
* |
* |
* |
* |
* |
|
|
5. Lubricate stands &all grease points using a high pressure grease gun |
* |
* |
* |
* |
* |
* |
|
|
6. Inspect wheels for cracks, kerb damage. Check spoked wheels for spoke security |
* |
* |
* |
* |
* |
* |
|
|
7. Inspect tyres for damage, tread wear, bulges,cuts and splits. Check tyre inflation pressures |
* |
* |
* |
* |
* |
* |
|
|
8. Inspect for oil leaks from all areas inc oil cooler, oil cooler pipes & engine |
* |
* |
* |
* |
* |
* |
|
|
9. Check engine idle speed 1100-1300 rpm |
* |
* |
* |
* |
* |
* |
|
|
10. Visually inspect all fittings for security. Tighten to the correct torque as necessary |
* |
* |
* |
* |
* |
* |
|
|
11. Carry out road test (minimum 10 miles) |
* |
* |
* |
* |
* |
* |
|
|
12. Disconnect battery, (negative first). Remove bodywork |
* |
* |
* |
||||
|
13. Inspect fuel system and hoses for leaks/damage, cracks, deterioration and chafing. |
* |
* |
* |
||||
|
14. Inspect cooling system and hoses for leaks/damage, cracks, deterioration and chafing. |
* |
* |
* |
||||
|
15. Add 50% coolant mixture to the expansion tank as necessary. Do not overfill. |
* |
* |
* |
||||
|
16. Check secondary air supply system |
* |
* |
* |
||||
|
17. Inspect brake system |
* |
* |
* |
||||
|
18. Remove sump plug and allow oil to drain out |
* |
* |
* |
||||
|
19. Renew sump lug washer and refit sump plug |
* |
* |
* |
||||
|
20. Renew engine oil filter |
* |
* |
* |
||||
|
21. Refill engine with correct specification engine oil |
* |
* |
* |
||||
|
22. Adjust spark plug gaps |
* |
* |
* |
||||
|
23. Renew spark plugs |
* |
* |
* |
||||
|
24. Check all valve clearances and adjust as necessary |
* |
* |
* |
||||
|
25. Check carburetor synchronization |
* |
* |
* |
||||
|
26. Check brake light switch |
* |
* |
* |
||||
|
27. Check headlight aim |
* |
* |
* |
||||
|
28. Check side stand |
* |
* |
* |
||||
|
29. Raise front wheel and inspect steering head bearings for free play. Lower front wheel |
* |
* |
* |
||||
|
30. Check suspension |
* |
* |
* |
||||
|
31. Inspect front forks for oil leaks/damage. |
* |
* |
* |
||||
|
32. Check and adjust engine oil level and refit battery (positive lead first) |
* |
* |
* |
||||
|
33. Check steering head bearings |
* |
* |
* |
||||
|
34. Refit all bodywork |
* |
* |
* |
||||
|
35. Replace air cleaner |
* |
* |
* |
||||
|
36. Renew brake fluid (12000m or 2yrs) |
* |
* |
|||||
|
37. Check final drive oil |
* |
* |
|||||
|
38. Replace final drive oil (24000m or 2 yrs) |
* |
Non-Scheduled Maintenance
|
Change the front fork oil |
|
|
Check the cylinder compression |
|
|
Re-grease the steering head bearings |
|
|
Re-grease the swingarm bearings |
|
|
Replace the brake master cylinder and caliper seals |
|
|
Replace the brake hoses |
Report Additional Work Carried Out