HONDA         4,000 Mile Scheduled Maintenance Check Sheet

 

Customer Name:                                 Mileage:                                  Model: NT650V Deauville      

 

V.I.N:                                                  Date:                                       Registration N0:

 

Work Completed:

Miles or           4000   

Months                        6

 

                                                                                                                                                            Tick ü

1    Check lights, horn, indicators, instrument warning lights, brake lights and instruments                             ¨

 

2    Inspect  throttle choke clutch cables for damage, fraying and correct level of  free play                         ¨

 

3    Inspect brake pads for wear                                                                                                               ¨

 

4    Lubricate stands &all grease points using a high pressure grease gun                                                    ¨

 

5    Inspect tyres for damage, tread wear, bulges,cuts and splits. Check tyre inflation pressures                    ¨

 

6    Inspect for oil leaks from all areas inc oil cooler, oil cooler pipes & engine                                             ¨

 

7    Check engine idle speed       1100-1300 rpm                                                                                       ¨

 

8    Visually inspect all fittings for security. Tighten to the correct torque as necessary                                ¨

 

9    Carry out road test (minimum 10 miles)                                                                                               ¨

 

 

 

Non-Scheduled Maintenance

 

¨                 Change the front fork oil

 

¨                 Check the cylinder compression

 

¨                 Re-grease the steering head bearings

 

¨                 Re-grease the swingarm bearings

 

¨                 Replace the brake master cylinder and caliper seals

 

¨         Replace the brake hoses

 

 

Report Additional Work Carried Out

 

 

 

 

 

 

 

 

 

 

 

 

HONDA         8,000 Mile Scheduled Maintenance Check Sheet

 

Customer Name:                                 Mileage:                                  Model: NT650V Deauville      

 

V.I.N:                                                  Date:                                       Registration N0:

 

Work Completed:

Miles or           8000   

Months                        12

 

                                                                                                                                                            Tick ü

1    Check lights, horn, indicators, instrument warning lights, brake lights and instruments                             ¨

 

2    Inspect  throttle choke clutch cables for damage, fraying and correct level of  free play                         ¨

 

3    Inspect brake pads for wear                                                                                                               ¨

 

4    Check and top up both brake master cylinders                                                                                     ¨

 

5    Lubricate stands &all grease points using a high pressure grease gun                                                    ¨

 

6    Inspect wheels for cracks, kerb damage. Check spoked wheels for spoke security                                ¨

 

7    Inspect tyres for damage, tread wear, bulges,cuts and splits. Check tyre inflation pressures                    ¨

 

8    Inspect for oil leaks from all areas inc oil cooler, oil cooler pipes & engine                                             ¨

 

9    Check engine idle speed       1100-1300 rpm                                                                                       ¨

 

10  Visually inspect all fittings for security. Tighten to the correct torque as necessary                                ¨

 

11  Carry out road test (minimum 10 miles)                                                                                               ¨

 

12  Disconnect battery, (negative first). Remove bodywork                                                                       ¨

 

13  Inspect fuel system and hoses for leaks/damage, cracks, deterioration and chafing.                               ¨

 

14  Inspect cooling system and hoses for leaks/damage, cracks, deterioration and chafing.                           ¨

 

15  Add 50% coolant mixture to the expansion tank as necessary. Do not overfill.                                       ¨

 

16  Check secondary air supply system                                                                                                    ¨

 

17  Remove sump plug and allow oil to drain out                                                                                       ¨

 

18  Renew sump lug washer and refit sump plug                                                                                       ¨

 

19  Renew engine oil filter                                                                                                                       ¨

 

20  Refill engine with correct specification engine oil                                                                                 ¨

 

21 Adjust spark plug gaps                                                                                                                        ¨      

 

22  Renew spark plugs                                                                                                                            ¨

 

23  Check all  valve clearances and adjust as necessary                                                                            ¨

 

24  Check carburetor synchronization                                                                                                       ¨

 

25  Check brake light switch                                                                                                                    ¨

 

26  Check headlight aim                                                                                                                                      ¨

 

27  Check side stand                                                                                                                               ¨

 

HONDA         8,000 Mile Scheduled Maintenance Check Sheet  (Cont.)

 

 

28  Raise front wheel and inspect steering head bearings for free play. Lower front wheel                                      ¨

 

29  Check suspension                                                                                                                              ¨

 

30  Inspect front forks for oil leaks/damage.                                                                                             ¨

 

31  Check and adjust engine oil level and refit battery (positive lead first)                                                    ¨

 

32  Refit all bodywork                                                                                                                             ¨

 

33  Replace air cleaner                                                                                                                            ¨

 

34  Check final drive oil                                                                                                                           ¨

 

 

Non-Scheduled Maintenance

 

¨                 Change the front fork oil

 

¨                 Check the cylinder compression

 

¨                 Re-grease the steering head bearings

 

¨                 Re-grease the swingarm bearings

 

¨                 Replace the brake master cylinder and caliper seals

 

¨         Replace the brake hoses

 

 

Report Additional Work Carried Out

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

HONDA         12,000 Mile Scheduled Maintenance Check Sheet

 

Customer Name:                                 Mileage:                                  Model: NT650V Deauville      

 

V.I.N:                                                  Date:                                       Registration N0:

 

Work Completed:

Miles or           12000 

Months                        18

 

                                                                                                                                                            Tick ü

1    Check lights, horn, indicators, instrument warning lights, brake lights and instruments                             ¨

 

2    Inspect  throttle choke clutch cables for damage, fraying and correct level of  free play                         ¨

 

3    Inspect brake pads for wear                                                                                                               ¨

 

4    Check and top up both brake master cylinders                                                                                     ¨

 

5    Lubricate stands &all grease points using a high pressure grease gun                                                    ¨

 

6    Inspect wheels for cracks, kerb damage. Check spoked wheels for spoke security                                ¨

 

7    Inspect tyres for damage, tread wear, bulges,cuts and splits. Check tyre inflation pressures                    ¨

 

8    Inspect for oil leaks from all areas inc oil cooler, oil cooler pipes & engine                                             ¨

 

9    Check engine idle speed       1100-1300 rpm                                                                                       ¨

 

10  Visually inspect all fittings for security. Tighten to the correct torque as necessary                                ¨

 

11  Carry out road test (minimum 10 miles)                                                                                               ¨

 

12  Inspect brake system                                                                                                                         ¨

 

13  Check steering head bearings                                                                                                             ¨

 

14  Renew brake fluid (12000m or 2yrs)                                                                                                             ¨

 

 

Non-Scheduled Maintenance

 

¨                 Change the front fork oil

 

¨                 Check the cylinder compression

 

¨                 Re-grease the steering head bearings

 

¨                 Re-grease the swingarm bearings

 

¨                 Replace the brake master cylinder and caliper seals

 

¨         Replace the brake hoses

 

 

Report Additional Work Carried Out

 

 

 

 

 

HONDA         16,000 Mile Scheduled Maintenance Check Sheet

 

Customer Name:                                 Mileage:                                  Model: NT650V Deauville      

 

V.I.N:                                                  Date:                                       Registration N0:

 

Work Completed:

Miles or           16000 

Months                        24

 

                                                                                                                                                            Tick ü

1    Check lights, horn, indicators, instrument warning lights, brake lights and instruments                             ¨

 

2    Inspect  throttle choke clutch cables for damage, fraying and correct level of  free play                         ¨

 

3    Inspect brake pads for wear                                                                                                               ¨

 

4    Check and top up both brake master cylinders                                                                                     ¨

 

5    Lubricate stands &all grease points using a high pressure grease gun                                                    ¨

 

6    Inspect wheels for cracks, kerb damage. Check spoked wheels for spoke security                                ¨

 

7    Inspect tyres for damage, tread wear, bulges,cuts and splits. Check tyre inflation pressures                    ¨

 

8    Inspect for oil leaks from all areas inc oil cooler, oil cooler pipes & engine                                             ¨

 

9    Check engine idle speed       1100-1300 rpm                                                                                       ¨

 

10  Visually inspect all fittings for security. Tighten to the correct torque as necessary                                ¨

 

11  Carry out road test (minimum 10 miles)                                                                                               ¨

 

12  Disconnect battery, (negative first). Remove bodywork                                                                       ¨

 

13  Inspect fuel system and hoses for leaks/damage, cracks, deterioration and chafing.                               ¨

 

14  Inspect cooling system and hoses for leaks/damage, cracks, deterioration and chafing.                           ¨

 

15  Add 50% coolant mixture to the expansion tank as necessary. Do not overfill.                                       ¨

 

16  Check secondary air supply system                                                                                                    ¨

 

17  Remove sump plug and allow oil to drain out                                                                                       ¨

 

18  Renew sump lug washer and refit sump plug                                                                                       ¨

 

19  Renew engine oil filter                                                                                                                       ¨

 

20  Refill engine with correct specification engine oil                                                                                 ¨

 

21